Login  Register

Re: [K1] Tuning Jump Cause

Posted by Don Wilhelm-4 on Jun 23, 2012; 1:12am
URL: http://elecraft.85.s1.nabble.com/K1-Tuning-Jump-Cause-tp7557929p7557995.html

Curt,

OK, that is information that I did not have initially, so I only
mentioned the possibility - my ISP is broken :-) ..
Given that new information, I would suggest you look for a faulty solder
connection.  Re-flow the soldering around the VFO pot with a hot (750
degF) soldering iron.

73,
Don W3FPR

On 6/22/2012 8:14 PM, [hidden email] wrote:
> My K1 is S/N 2258, don't remember when I built it but believe around 2007. Would the pot wear out in 5 years? The rig isn't used that often and nearly always inside.  It has always been in air conditioned and dry conditions.
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html