Posted by
Pierfrancesco Caci on
Jun 27, 2012; 9:39am
URL: http://elecraft.85.s1.nabble.com/K3-KX3-Operating-Tip-APF-audio-peaking-filter-for-weak-signal-CW-work-tp7558208p7558246.html
>>>>> "Ian" == Ian White GM3SEK <
[hidden email]> writes:
Ian> Wayne Burdick wrote:
>> on the K3, it's labeled "DUAL PB" (hold). The K3 actually provides two
>> different special filter functions; use the DUAL PB menu entry to set
>> up the switch for APF.
Ian> On the K3, it would be really helpful to have an option to reconfigure
Ian> that button on the K3 as "tap = APF" so that we don't have to lose "hold
Ian> = DUAL PB".
Ian> "Tap = APF" would also bring the K3 into line with the KX3.
Ian> Obviously APF and DUAL PB cannot both be selected at the same time, but
Ian> it would still be helpful to have either one available QUICKLY on the
Ian> same button.
Ian> No XFIL users would be inconvenienced by making this a configuration
Ian> option.
I'd hate to lose the possiblity to quickly tighten the filters with one
tap (think digimodes, where you switch from looking at a 3 kHz waterfall
down to a single psk signal with just 3 presses of that button).
What about long hold (more than 3 seconds)? I think long hold is already
used somewhere else in the firmware, so the function to recognize it is
already there.
Pf
--
Pierfrancesco Caci, ik5pvx
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html