Re: Amplifier keying line delay setting
Posted by
Rick Stealey on
Jul 03, 2012; 5:22pm
URL: http://elecraft.85.s1.nabble.com/Amplifier-keying-line-delay-setting-tp7558555p7558556.html
In cw mode:
Make sure QSK is not on.
Make sure VOX is on.
Push in and hold the speed control till "CW n.nn" appears.
Rotate the speed control to set the drop out time you want.
Anything up to 2 seconds can be set.
Let us know if this doesn't work for you.
Rick K2XT
> It appears that the amplifier keying line is always set to operate as
> QSK with
> no delay. This keying signal dose not follow the delay that is set for
> the VOX
> on CW.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html