Re: Cables from K60XV >> XVxxx
Posted by
Terry Schieler on
Jul 11, 2012; 4:20pm
URL: http://elecraft.85.s1.nabble.com/Cables-from-K60XV-XVxxx-tp7558950p7558982.html
That's exactly what I did for my XV50. Mine were about 10" long.
Terry, W0FM
-----Original Message-----
From: Don Wilhelm [mailto:
[hidden email]]
Sent: Tuesday, July 10, 2012 6:11 PM
To: Mark Adams
Cc:
[hidden email]
Subject: Re: [Elecraft] Cables from K60XV >> XVxxx
Mark,
I made up my own cables from RG-58. RCA plugs (use good quality) on one end and BNC males at the other.
73,
Don W3FPR
On 7/10/2012 7:00 PM, Mark Adams wrote:
> Hi Gang,
>
> I've long wondered if you can get short, nicely shielded commercially
> made coax cables to run from the phone jacks on the K60XV to the first
> XV unit in a daisy chain. I use some "Platinum F3" audio cables with
> phonos on each end along with phono>BNC adapters at the transverter.
> Actually, I don't even know if my audio cables are 50 Ohms. I see a
> couple of options and would like comments.
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html