Re: KPA500 not reading Band Data
Posted by
Iain MacDonnell - N6ML-2 on
Jul 14, 2012; 12:48am
URL: http://elecraft.85.s1.nabble.com/KPA500-not-reading-Band-Data-tp7559077p7559081.html
On Fri, Jul 13, 2012 at 5:20 PM, w0uo <
[hidden email]> wrote:
> Elecrafters:
>
>
>
> I just installed a "Y" cable from my K-3 to an Array Solutions DBS-1 band
> decoder and my KPA 500. The band decoder follows the K-3 perfectly, but the
> K-3 doesn't read band data. It does tell the K-3 when it is on standby and
> operate and the K-3 sets the power level accordingly. From this I assume
> that it is not reading the four band data pins (when powered up it reads 5.3
> MHz, all logic zeroes, and does not change until it senses RF).
If you unplug the band decoder from the Y-cable (but leave the KPA500
connected to the other "leg"), does the KPA500 work as expected?
73,
~iain / N6ML
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html