Re: W2 directional coupler N-connector

Posted by Robert Friess on Aug 07, 2012; 5:08pm
URL: http://elecraft.85.s1.nabble.com/W2-directional-coupler-N-connector-tp7560540p7560546.html

The sensors can be ordered with N connectors from Elecraft.

Bob, N6CM

On Tue, Aug 7, 2012 at 9:45 AM, Ken G Kopp <[hidden email]> wrote:

> Yes Paul, the connectors on the sending units are easily changed.
> All mine have been changed using kits from Morse Express that
> come with nicely-done interfacing plates to compensate for the
> pattern change.  I've also changed the three antenna connectors
> on my K3 using these neat little kits.
>
> A caution ... take note of the TRANSMITTER and LOAD labels and
> the positioning of the cover.  You have a 50-50 chance of reversing
> the labeling if you reverse the cover.  The labeling is on the -cover-
> and not the unit itself.
>
> 73!
>
> Ken Kopp - K0PP
>
>  On Tue, Aug 7, 2012 at 4:12 PM,  <[hidden email]> wrote:
> > I am considering a small EME station on 432 Mhz. I would like to
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html