Re: W2 directional coupler N-connector
Posted by
GARY-2 on
Aug 09, 2012; 2:06am
URL: http://elecraft.85.s1.nabble.com/W2-directional-coupler-N-connector-tp7560540p7560657.html
One reason I experience is that UHF connectors are not available for all
types of coaxial cable. Case in point, UHF connectors are no longer
available for some sizes of Andrew (now Commscope) Heliax however type-N or
BNC are for those sizes. So it's not always a bandwidth, loss, or impedance
related problem but a simple hardware issue instead.
Gary
N6LRV
-----Original Message-----
From:
[hidden email]
[mailto:
[hidden email]] On Behalf Of
[hidden email]
Sent: Tuesday, August 07, 2012 1:08 PM
To:
[hidden email]
Cc:
[hidden email]
Subject: Re: [Elecraft] W2 directional coupler N-connector
not sure why you would change UHFs are good at 432.....
Bob K3DJC
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html