KX1 Displayed voltage question
Posted by
Phillip Lontz on
Aug 10, 2012; 11:46pm
URL: http://elecraft.85.s1.nabble.com/Elecraft-K3-KX3-Software-CW-in-K3-and-KX3-and-contesting-tp7560803p7560815.html
I have applied 13.66 volts from my HP lab power supply... also I measured it with the Fluke 179 and a Fluke 2840. Both Flukes are more or less in agreement.
The KX1 battery display says it is 13.3vdc when it is powered up.
A....... is there a way to adjust the display voltage on the KX1 so that it more closely matches the Flukes etc? OR
B.......is the .3 vdc difference about the correct voltage drop for the KX1 and then the KX1 is more or less correct and no adjustment not needed?
Thank You
Phil
Santa Fe
KF5ROJ (New ticket Today)( yeeeaah!!!)
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html