Re: Detection ob BY-1 Iambic Keyer with K2

Posted by Mike K8CN on Sep 30, 2012; 10:30pm
URL: http://elecraft.85.s1.nabble.com/Detection-ob-BY-1-Iambic-Keyer-with-K2-tp7563519p7563529.html

Hi OM,

I presume you're using the BY-1 alone without an external keyer?  If so, tap the K2's MENU button, scroll through the Main Menu options until you reach INP (for the key/paddle INPut), then hold EDIT (same button), then select PDLn if your paddle is wired "normally." Tap the MENU button twice to exit the configuration mode.  Use PDLr if dot/dash sides are reversed from what you expect.  See page 99 of the K2's Rev. I manual for more detail.  Hope this helps!

73,
Mike, K8CN