Re: KPA500 build problem - no out put, no PC connection
Posted by
N5GE-2 on
Oct 09, 2012; 1:42pm
URL: http://elecraft.85.s1.nabble.com/KPA500-build-problem-no-out-put-no-PC-connection-tp7563878p7563891.html
Regarding the fan: Pull the top cover and make sure the fan's power
cable is plugged in. It is easy to unplug the fan power while
installing the rear panel.
On Tue, 9 Oct 2012 00:13:55 -0700 (PDT), Stan AE7UT
<
[hidden email]> wrote:
>I just finished my KPA500 and am having some trouble.
>I'm using it with a K3 and the Aux cable.
>
>It powers up fine. HV is 73.0, FAN CTL doesn't turn fans on.
>The fan does not run when I turn it off as stated in the manual.
>The KPA500 utility can't connect with it.
>Using the same cable I can use the K3 utility without a problem.
>The K3 switches the bands on the KPA500 and the KPA500 switches the K3
>bands.
>The K3 indicates when I switch from standby to operate.
>On standby I can operate with no problem.
>
>I have removed the front panel and reseated the cables twice.
>I did not pull the transformer or play with the I/O module.
>I'll do that tomorrow when I get a little more time.
>
>Anyone have similar problems? Any thoughts?
>Of course I'll call Elecraft for help if nothing seems to work.
>
>73
>Stan AE7UT
Amateur Radio Operator N5GE
ARRL Lifetime Member
QCWA Lifetime Member
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html