Re: KPA500 build problem - no out put, no PC connection

Posted by Stan AE7UT on Oct 09, 2012; 8:36pm
URL: http://elecraft.85.s1.nabble.com/KPA500-build-problem-no-out-put-no-PC-connection-tp7563878p7563902.html

All is well in Zion!

Thanks to all you Elecrafters for your help.
I took off the transformer and looked at the I/O board.
The 10 wire ribbon cable was loose.  How the "H" did that happen?
Well, I pushed it down - reassembled and it appears to be working FB.

The nice thing is I was not at all nervous about whether "we" could get it
working.  The first kit I built had me a bit on edge.  I really didn't want to
spend $500 dollars on something I would never get working.  After some
troubles with my K1 and the great support of this group and Elecraft, I
really know that these rigs are going to work - despite my ineptitude.

Thanks again.
73
Stan AE7UT