Re: are KXUSB and KXUSBa interchangeable?
Posted by
Don Wilhelm-4 on
Dec 14, 2012; 2:03pm
URL: http://elecraft.85.s1.nabble.com/KAT-500-how-to-modify-Autotune-threshold-Apparently-I-can-t-tp7566617p7567161.html
Scott,
I did not see a response to your question on the reflector.
The answer is NO.
The P3 takes a regular DE-9 connector (as found on most USB to serial
adapters) while the KX3, XG3 and KAT500 take a 3.5mm stereo plug
carrying only TXD and RXD and signal ground
73,
Don W3FPR
On 12/11/2012 1:14 PM, Scott Monks wrote:
> Hello all;
>
> I am ordering a P3 today and would like to consider ordering a second KXUSB as a backup because I have nightmares that my cable might fail and I will be left without a hookup at a critical moment.
>
> Is the KXUSBa that came with my KX3 interchangeable as a backup? I know, I could try it, but if it is not interchangeable and I damage something I will be up the proverbial creek without a cable until I can get one.
>
>
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html