Posted by
Iain MacDonnell - N6ML-2 on
Dec 14, 2012; 5:49pm
URL: http://elecraft.85.s1.nabble.com/KAT-500-how-to-modify-Autotune-threshold-Apparently-I-can-t-tp7566617p7567176.html
Further; the adapter cable for use with the K3/P3 is the KUSB, not KXUSB.
It's not completely clear what Scott was planning to interchange. If
it's really a KXUSB (for use with something other than the P3), I
believe that the 'a' on "KXUSBa" just means that it's a
separate/"extra" item (not bundled with a device that uses it).
73,
~iain / N6ML
On Fri, Dec 14, 2012 at 6:03 AM, Don Wilhelm <
[hidden email]> wrote:
> Scott,
>
> I did not see a response to your question on the reflector.
> The answer is NO.
> The P3 takes a regular DE-9 connector (as found on most USB to serial
> adapters) while the KX3, XG3 and KAT500 take a 3.5mm stereo plug carrying
> only TXD and RXD and signal ground
>
> 73,
> Don W3FPR
>
>
> On 12/11/2012 1:14 PM, Scott Monks wrote:
>>
>> Hello all;
>>
>> I am ordering a P3 today and would like to consider ordering a second
>> KXUSB as a backup because I have nightmares that my cable might fail and I
>> will be left without a hookup at a critical moment.
>>
>> Is the KXUSBa that came with my KX3 interchangeable as a backup? I
>> know, I could try it, but if it is not interchangeable and I damage
>> something I will be up the proverbial creek without a cable until I can get
>> one.
>>
>>
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html