Re: K3 power supply recommendations
Posted by
n7ws on
Apr 17, 2013; 4:05am
URL: http://elecraft.85.s1.nabble.com/Cancel-XG3-morse-tx-tp7572629p7572725.html
Use your meter. BTW, I second, third, fourth... the recommendation of the RM-35. Mine has been converted to a "smart charger" that keeps a 95AH AGM battery charged, but before that was used normally without incident.
--- On Tue, 4/16/13, Gary K9GS <
[hidden email]> wrote:
From: Gary K9GS <
[hidden email]>
Subject: Re: [Elecraft] K3 power supply recommendations
To:
[hidden email]
Date: Tuesday, April 16, 2013, 9:56 PM
I have a question on adjusting the voltage a bit higher for use with the
K3. I was thinking of 14.5 V, as others have mentioned, and adjusting
voltage on receive.
I have an accurate voltmeter.
Should I set the voltage with the voltmeter measuring at the DC input to
the K3 (at the power pole into the radio) or should I use the internal
voltmeter in the K3?
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html