Posted by
Rick Tavan N6XI on
Sep 28, 2013; 3:21am
URL: http://elecraft.85.s1.nabble.com/KPA500-Suggested-checklist-for-installing-KPA-and-KAT-with-K3-tp7579314p7579315.html
Using a switch for your three devices' RS232 connections reduces the number
of parts on the desk and the number of COMn allocations in your O/S. It may
work for you if your only use for RS232 is occasional firmware updates. In
fact, for that you could lose the switch, too, and just swap connectors.
But there are nice operating aids on the Operate pages of the KPA and KAT
Utilities that you might want to use while also operating the radio and
controlling it with a logging program. There are also some third party apps
that help with KPA and KAT operation and take up less screen space than the
Elecraft Utilities. If you operate remotely, one or the other is almost
essential. I always use separate RS232 connections for each device. No, I
don't have lots of real serial ports on my computer - just one, actually.
But I use lots of USB-Serial adapters with considerable success. They add
some maintenance chores but to me they're worth it.
Have fun,
/Rick N6XI
On Fri, Sep 27, 2013 at 7:45 PM, W5UXH <
[hidden email]> wrote:
> I placed the order for the factory assembled KPA and KAT to go with my
> K3/100. I would like to identify any specific configuration items I need
> to
> be aware of to hopefully smooth the integration of all three units.
>
> Things already taken care of:
> Latest K3 firmware (04.67).
> Two 15 pin cables assembled per AD5X instructions.
> KPA and KAT utilities installed.
> I plan to use a single USB to RS-232 cable (already in use on the K3) with
> a
> switch box for all three units. I still need to fabricate the DE-9 to 1/8"
> stereo plug adaptor for the KAT but have the wiring information needed for
> that.
>
> Obvious configuration menu items to set:
> Amplifier Key Interrupt Power: select "Optimize for the KPA500"
> Tuner Antenna selection per band: I will set this appropriately for the
> two
> antennas I use. (It appears that this can be set in the Configuration
> menu,
> but it sounds as if one can just "train" this setting on each band while
> training the tuner settings.)
>
> In reading the KPA and KAT manuals I have not run across anything else so
> far. I will need to set my K3 drive level for each band of course
> (currently set for an AL-80B/QSK amp).
>
> My hope is to be able to hook everything up and be ready to train the KAT
> for each frequency segment of bands of interest, set the K3 drive level for
> each band, and be ready to go.
>
> I will appreciate any suggestions / pointers that current users can
> provide.
> I suspect there will be one or more menu items in the K3 needed, so I need
> to study the K3 documentation next.
>
>
>
>
> --
> View this message in context:
>
http://elecraft.365791.n2.nabble.com/KPA500-Suggested-checklist-for-installing-KPA-and-KAT-with-K3-tp7579314.html> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html>
--
Rick Tavan N6XI
Truckee, CA
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html