Posted by
Don Wilhelm-4 on
Feb 13, 2014; 7:05pm
URL: http://elecraft.85.s1.nabble.com/K2-Won-t-power-on-tp7584083p7584197.html
Jeremy,
I would tend to believe the reading on the 2000 ohm scale.
Look at the display in the 200 ohm scale and see if it shows a "+" to
the left - If so, that indicates overrange and you should switch to a
higher range.
I would also believe that the 20k and 200k scales are showing you
resistance in kilo ohms.
The voltage used for resistance measurements may change as you switch
scales.
In other words, it sounds like no short on the 12v power rail, but do
check the instructions for your meter so you know what the display is
telling you.
Inexpensive meters are normally fairly accurate for voltage readings,
but not necessarily for resistance.
73,
Don W3FPR
On 2/13/2014 1:55 PM, JeremyJones wrote:
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.html