http://elecraft.85.s1.nabble.com/P3-Beta-software-Bug-tp7587926p7587949.html
I agree here ... FSK D, AFSK A, and PSK D should show 400, 400 and 100
... Joe, W4TV
> Hi Alan,
>
> I think you should go a bit deeper and read the data sub mode and the DSP
> bandwidth and have the transmit cursor agree more closely to how the
> operator is listening to signals. When I'm operating split in RTTY the last
> thing I want to see is a 2.7KHz wide red cursor cluttering up the screen. If
> you can't do this then there could be a menu option to adjust the red cursor
> width.
>
> 73,
> Mike K2MK
>
>
> Alan Bloom wrote
>> One change in the beta firmware is to make the width of the transmit
>> cursor in "Data A" mode equal to 2.7 kHz. The reason is that in Data A
>> mode there is no way for the firmware to know what the actual bandwidth
>> is - it can be whatever is coming out the PC's sound card. So rather
>> than assume narrow-FSK as in the old firmware, the new firmware makes
>> the cursor width equal to the SSB bandwidth.
>>
>> Alan N1AL
>>
>>
>> On 04/25/2014 05:37 PM, Harry_Yingst via Elecraft wrote:
>>> I am new to having a P3 (with SVGA).
>>>
>>> I loaded the new beta and now there is a red background while in data
>>> mode
>>> Is that the Transmit cursor (I do not recall seeing it before)?
>>>
>>>
>>> I noticed on the VGA monitor the Red will go from Low intensity Red to
>>> High
>>> intensity Red when you change the Waterfall Colors form Default to Grey
>>> scale.
>>>
>
>
>
>
>
> --
> View this message in context:
http://elecraft.365791.n2.nabble.com/P3-Beta-software-Bug-tp7587926p7587946.html> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]
>