Re: KPA500 - LED Alignment

Posted by Harry_Yingst on May 09, 2014; 6:34pm
URL: http://elecraft.85.s1.nabble.com/KPA500-LED-Alignment-tp7588837p7588841.html

Thank you, I have been seriously considering getting this amplifier.

I have been thinking about the alignment of the LEDs and knew it would bug me for them to not be straight.





________________________________
 From: Don Wilhelm <[hidden email]>
To: Harry_Yingst <[hidden email]>; [hidden email]
Sent: Friday, May 9, 2014 2:29 PM
Subject: Re: [Elecraft] KPA500 - LED Alignment
 

Harry,

Remove the front panel enclosure and tilt the LEDs until they are
aligned to your satisfaction, then put the front panel metalwork back
on.  They will stay aligned.

73,
Don W3FPR

On 5/9/2014 2:10 PM, Harry_Yingst wrote:

> In many photos of this amp it looks like the LEDs are not lined up (some
> higher others lower)
> I realize this is cosmetic, but it's a distraction from it's otherwise nice
> appearance.
>
> Is there a way to bet them to perfectly line up and stay that way?
>
>
> Thank you.
>
>
>
>
>
> --
> View this message in context: http://elecraft.365791.n2.nabble.com/KPA500-LED-Alignment-tp7588837.html
> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]