Re: KPA500 - LED Alignment
Posted by
Tighe Kuykendall on
May 09, 2014; 6:49pm
URL: http://elecraft.85.s1.nabble.com/KPA500-LED-Alignment-tp7588837p7588843.html
I believe the manual says to use a straight edge or ruler to gently push
against them to align the LEDs. That's what I did and mine are all
fairly well aligned.
Tighe
NK4I
On 5/9/2014 2:34 PM, Harry Yingst wrote:
> ________________________________
> From: Don Wilhelm <
[hidden email]>
> To: Harry_Yingst <
[hidden email]>;
[hidden email]
> Sent: Friday, May 9, 2014 2:29 PM
> Subject: Re: [Elecraft] KPA500 - LED Alignment
>
>
> Harry,
>
> Remove the front panel enclosure and tilt the LEDs until they are
> aligned to your satisfaction, then put the front panel metalwork back
> on. They will stay aligned.
>
> 73,
> Don W3FPR
>
>
--
Tighe Kuykendall
NK4I | www.NK4I.com | Follow Me on Twitter: @NK4I
ARRL Life Member, NAQCC #6467
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]