Re: Freq Editor req for update - allow entry of WX freqs

Posted by Phil Wheeler-2 on
URL: http://elecraft.85.s1.nabble.com/K2-Straight-key-auto-detect-tp7593193p7593244.html

Hey, Joe --

 From the Elecraft KX3 Module FAQ:

*Q:What frequency range will the module cover?*

A:On 2 meters: About 120 to 165 MHz, allowing copy
of weather-band stations at 162 MHz, airport tower
AM in the 120 MHz range, etc. On 4 meters: About
65-72 MHz. Sensitivity gradually falls off outside
the associated ham bands.

Phil W7OX

On 9/20/14, 3:33 PM, Joe Subich, W4TV wrote:

>
> The K3/KX3 can't tune those frequencies ... even
> with the
> 2 meter transverters.  Those frequencies would
> be well above
> 30 MHz (IF limit).
>
> 73,
>
>    ... Joe, W4TV
>
>
> On 2014-09-20 5:31 PM, Jeff Herr wrote:
>> Would it be possible to get the k3/kx3 freq
>> memory editor ver 1.3.3.0
>> updated to allow entry of the NOAA weather
>> channels?
>>
>> 162.400, .425, .450, .475, 162.500, .525, .550
>>
>> currently i get a little red exclamation mark
>> error.
>>
>>
>>
>> Jeff Herr,  WW6L
>> 4636 Kelton Way
>> Sacramento, Ca 95838
>> 916.925.6089

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]