Login  Register

Re: P3 reverse or inverted tuning display;wrong direction, new owner

Posted by Paul Saffren N6HZ on Oct 05, 2015; 4:01pm
URL: http://elecraft.85.s1.nabble.com/P3-reverse-or-inverted-tuning-display-wrong-direction-new-owner-tp7608676p7608719.html

Hi Charly,

It sounds like what you want is to enable Fixed Tune mode.   In Fixed Tune, the spectrum is stationary and the VFO A (and/or B) cursors move up and down.  To turn on fixed tune mode, press the menu button, then using the encoder, select the menu item "FixTrack" .   Pushing the encoder in will toggle between Tracking and Fixed.   You can also map a function key to toggle between Fixed and Tracking.   Refer to the manual on how to set a function key.

Kind regards,

Paul
Paul Saffren - N6HZ
Project Manager
Elecraft Inc. 
www.elecraft.com
On 10/3/2015 3:00 PM, Charly [via Elecraft] wrote:
How can I get the cursor line on P3 to travel up-band when I tune K3 up-band and get the cursor line to move down-band when I tune the K3 down-band.  P3 is new, and I tried the obvious with no results.
Pse help this ridiculous situation, tnx, Charly K4VUD


If you reply to this email, your message will be added to the discussion below:
http://elecraft.365791.n2.nabble.com/P3-reverse-or-inverted-tuning-display-wrong-direction-new-owner-tp7608676.html
To unsubscribe from [P3], click here.
NAML