Re: K1 no audio
Posted by
wingman67 on
Jan 11, 2016; 4:48pm
URL: http://elecraft.85.s1.nabble.com/K1-no-audio-tp7612521p7612533.html
Problem solved, thanks for the pointers Don! In checking the RF board and filter board over and over, I disassembled the front-panel so I could get to the FP board again, resoldered pin 10 on J1 since it didn't look as good to me as it could have been and then, as I went over everything I found an unsoldered leg on R11. I am normally extremely meticulous when it comes to building but this one got past me! Soldered that leg, re-assembled the FP assembly and hooked it back up to the K1's RF and all is well. VFO works and all tests pass.
I think maybe I just need a larger magnifying glass. :)
So now I'm ready to start working on the TX section of the board.
Thanks again Don.
John Hines