> On Jan 11, 2016, at 10:48 AM, wingman67 via Elecraft <
[hidden email]> wrote:
>
> Problem solved, thanks for the pointers Don! In checking the RF board and
> filter board over and over, I disassembled the front-panel board again,
> resoldered pin 10 on J1 since it didn't look as good to me as it could have
> been and then, as I went over everything I found an unsoldered leg on R11.
> I am normally extremely meticulous when it comes to building but this one
> got past me! Soldered that leg, re-assembled the FP assembly and hooked it
> back up to the K1's RF and all is well. VFO works and all tests pass.
>
> So now I'm ready to start working on the TX section of the board.
>
> Thanks again Don.
>
>
>
> -----
> John Hines
> --
> View this message in context:
http://elecraft.365791.n2.nabble.com/K1-no-audio-tp7612521p7612533.html> Sent from the Elecraft mailing list archive at Nabble.com.
> ______________________________________________________________
> Elecraft mailing list
> Home:
http://mailman.qth.net/mailman/listinfo/elecraft> Help:
http://mailman.qth.net/mmfaq.htm> Post: mailto:
[hidden email]
>
> This list hosted by:
http://www.qsl.net> Please help support this email list:
http://www.qsl.net/donate.html> Message delivered to
[hidden email]