Re: Low power out, ERR TXG when trying to calibrate power

Posted by M0VFC on
URL: http://elecraft.85.s1.nabble.com/Low-power-out-ERR-TXG-when-trying-to-calibrate-power-tp7629471p7629508.html

Just to update on this thread: repeating the calibration on 10MHz with 13.8V applied does get to 4/6W indicated on the VFO B display, but on tapping XMIT, still gives ERR TXG (D=228 or thereabouts on the main bit of the display). I'll drop Elecraft an email.

73,

Rob, M0VFC

On 18 April 2017 at 13:07, Don Wilhelm [via Elecraft] <[hidden email]> wrote:

Rob,

I would try running the TX Gain Calibration with a higher voltage power
source - at least 13.8 volts.

If it still fails, contact Elecraft support.

73,
Don W3FPR