Re: K3S Kit issue - Does not transmit in SSB
Posted by
Don Wilhelm on
Jul 31, 2017; 8:17pm
URL: http://elecraft.85.s1.nabble.com/K3S-Kit-issue-Does-not-transmit-in-SSB-tp7632922p7632940.html
For DATA modes, use DATA A and set the data mode MIC SEL to LINE IN - if
you try to use SSB with MIC+LIN you will end up transmitting voice as
well as data through the live mic.
With the USB connection using the internal K3 soundcard, make certain
nothing is plugged into the 3.5mm LINE IN jack.
Adjust the soundcard slider and the MIC GAIN (now LINE IN gain) to
produce 4 bars solid on the ALC meter with the 5th bar flashing.
Adjust your desired power with the power knob.
Ignore the internet advice to adjust the power with the audio level, it
does not work well with Elecraft gear.
73,
Don W3FPR
On 7/31/2017 3:17 PM, VE8EM wrote:
> I would like to say thank you all for your answers. The BIAS was the issue
> for the MH2 microphone, I am able to transmit SSB now but somehow I am still
> having issue with the computer connection...
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]