[K2] Sensitivity Spec
Posted by
Elecraft mailing list on
Aug 15, 2017; 8:10pm
URL: http://elecraft.85.s1.nabble.com/K2-Sensitivity-Spec-tp7633423.html
I'm just trying to evaluate if I have the gain distribution right for a K2 used as an IF for a 10 GHz transverter, through a 2 m transverter mounted inside the QRP top. The K2 manual gives a specification for the MDS but fails to define the bandwidth at which it is measured. Sherwood's receiver table lists some measured values at 500 Hz bandwidth but fails to note whether the preamp is on or off for these measurements. So I am not quite sure what the sensitivity should be.
Can anyone clarify?
73,
Steve VE3SMA
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]