Re: KX3 with BL2 Question
Posted by
Don Wilhelm on
Oct 04, 2017; 2:00pm
URL: http://elecraft.85.s1.nabble.com/KX3-with-BL2-Question-tp7634878p7634880.html
Stan,
Either of those options will work - however ---
I would suggest minimizing the coax. The balun will not transform to a
50 ohm load, so the coax can run at a high SWR which will give more loss
than the window line.
Whether that minimum is zero or 5 feet will not make a significant
difference, so use whatever is convenient for your station.
73,
Don W3FPR
On 10/4/2017 9:26 AM, stan levandowski wrote:
> When operating a KX3 with the internal ATU into a window line fed
> doublet through a BL2 balun, what is the preferred connection method:
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]