Switching or sharing the ACC/AUX line between KPA500 and KPA1500
Posted by
Dan AE9K on
Oct 10, 2017; 9:16pm
URL: http://elecraft.85.s1.nabble.com/Switching-or-sharing-the-ACC-AUX-line-between-KPA500-and-KPA1500-tp7635041.html
In preparation for the arrival of my KPA1500 I was wondering if a simple
two-port VGA switch would be the best approach for switching the ACC/AUX
line to allow the selection of the KPA500 or the KPA1500. Or is a simple Y
cable ok? Pin 10 PTT would be open ahead of the switch or Y cable to allow
continued use of the keying line which is switched among two amps currently
- soon to be a third.
I assume at some point the KPA1500 will just become the only amp connected
but in the short term a lot of A/B testing will occur so I'm just looking
for the simplest means of accommodating both the KPA500 and KPA1500 without
moving the ACC cable back and forth.
73,
Dan
AE9K
--
Sent from:
http://elecraft.365791.n2.nabble.com/______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]