Re: K3 Audio

Posted by Joe Subich, W4TV-4 on Oct 19, 2017; 1:40am
URL: http://elecraft.85.s1.nabble.com/K3-Audio-tp7635215p7635220.html

On 10/18/2017 9:28 PM, K4MWB wrote:
> I'm mostly a CW op, so I'd assume raising the 400-500 Hz range and
> suppressing the higher frequencies would help.

With typical filter widths, there is no real value to RX EQ on CW.  I
tend to leave 0.40 and 0.80 flat and set 0.05, 0.10, 2.40, 3.20 to
-16.  0.20 and 1.60 are either flat or a slight (-3) roll off.

The nice thing about the K3 is that it will store separate RX EQ for
CW and SSB so setting one will not mess up the other mode.

73,

    ... Joe, W4TV


On 10/18/2017 9:28 PM, K4MWB wrote:

> Joe and Jim, thanks for the equalization advice. I'm mostly a CW op, so I'd
> assume raising the 400-500 Hz range and suppressing the higher frequencies
> would help. I'll tinker with it.
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]