Re: K3 GET/SET command for LINE-IN level?

Posted by Dan AE9K on Jan 02, 2018; 7:43pm
URL: http://elecraft.85.s1.nabble.com/K3-Program-SET-of-LINE-IN-GAIN-tp7611903p7637083.html

I too am going to work remote and have a need to get/set the LINE IN level
programmatically.  The November 2017 programmers reference still contains no
commands for LINE IN.

Given how it works on the front panel I was expecting the MG (mic gain)
command to return the LINE IN level when in DATA A mode just as the MIC knob
does in DATA A mode. Alas, that's not how the MG command works - it always
returns mic gain without regard to mode.

Is there a way to get/set LINE IN I've overlooked?

Thanks,

Dan
AE9K



--
Sent from: http://elecraft.365791.n2.nabble.com/
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]