Re: KAT500 Remote software

Posted by Don Wilhelm on Jan 11, 2018; 1:37pm
URL: http://elecraft.85.s1.nabble.com/KAT500-Remote-software-tp7637315p7637316.html

Jack,

For any wattmeter (the one in the KAT500 included), the VFWD and VRFL
values are related to forward power and reflected power.  Those are raw
numbers and some math is required to calculate the actual power and SWR.

VRFL subtracted from VFWD can be used to computer the power into the
load (in this case the input to the KAT500), but you need to know the
scaling factor that may be unique to the wattmeter.

Similarly, if you divide VRFL by VFWD, you will obtain a result that is
related to the SWR.

See the formulas associated with SWR in most any book dealing with
antennas and transmission lines.

73,
Don W3FPR

On 1/11/2018 7:07 AM, Jack Satterfield wrote:

> Can someone explain the VFWD and VRFL readings in the bottom right of
> screen?
>
> When I put out a 15w tune signal, VFWD reads 225 and VRFL reads 2 to 3
>
> Just trying to make sense of the readings
>
>  
>
> Jack
>
> W4GRJ
>
>  
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]