Re: P3 SVGA interference -
Posted by
Don Wilhelm on
Feb 11, 2018; 9:32pm
URL: http://elecraft.85.s1.nabble.com/P3-SVGA-interference-tp7556731p7638111.html
Mike,
I don't think I have seen this as a suggestion so far in the thread.
It is important that you dress the cables for the SVGA option exactly as
shown in the installation manual.
If they do not want to stay in place, use a ty-wrap around the cables.
73,
Don W3FPR
On 2/11/2018 12:50 PM, mjpilgrim wrote:
> I am almost overwhelmed by all the very thoughtful suggestions. Here's what
> I know so far.
>
> I had previously performed the idea of turning off all items in the room
> except for the radio and P3, but the reported symptom remains. I then
> switched my antenna switch to the grounded position, and the problem goes
> away......... Now my suspicion is that my rfi is created from outside my
> house. My antenna system consists of two end fed long wires, 90% opposed to
> each other, and a minimal vertical out behind the house.
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]