KPA1500 TX Sample

Posted by David Box-2 on Mar 23, 2018; 2:09pm
URL: http://elecraft.85.s1.nabble.com/KPA1500-TX-Sample-tp7639539.html

I am trying to get ready for delivery of the KPA1500 and have become
confused about the information available for the TX Sample port.

The only information I can find states that this is a low-level signal
of -60dBm but dBm is a measure of absolute power which would put this
signal at 1 nanowatt.

My first thought is that this is a typo and meant to show that the
signal level on the port is -60dB with respect to output but need some
verification.

Is there any information that shows actual transfer function between the
output power and the TX sample port voltage into a 50 ohm load?

Thanks

Dave K5MWR

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]