Re: When to use the preamp on the K3/K3S
Posted by
Don Wilhelm on
May 23, 2018; 9:22pm
URL: http://elecraft.85.s1.nabble.com/When-to-use-the-preamps-on-the-KX2-KX3-vs-K3-K3S-Wayne-Burdick-tp7641068p7641122.html
There are guidelines on my website www.w3fpr.com for how to set the
K3/K3S AGC Threshold and Slope for best results.
See the "Noisy K3" article.
73,
Don W3FPR
On 5/23/2018 4:37 PM, Al Lorona wrote:
> Scott,
>
> If the weakest signals are already activating the AGC, that's the exact condition that leads to the many 'my K3 is noisy' complaints that we see here. Plus, that tends to make all signals sound like they're the same strength, another complaint we've heard in the past.
>
> In fact, you don't want weak signals activating AGC. You want strong signals, above a certain threshhold (AGC THR on the K3) to activate it.
>
> This gives you a nice, quiet linear region where weak signals sound weak, and stronger signals sound stronger.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]