Posted by
Clay Autery-2 on
Jun 05, 2018; 7:21pm
URL: http://elecraft.85.s1.nabble.com/K3S-XREF-GPSDO-recommendation-needed-tp7641686p7641713.html
The software COULD be better. I needed 36 MHz and 10 MHz and that
wasn't "available" directly in the software, but with the right manual
parameter settings, you can achieve virtually ANY combination.
I believe Wes, you were the one that clued me in to this fact..... as
well as the multiple parameter combination to achieve the same output
freq combos.
As you said.... 10 MHz only... easy-peasey.
Question that will save me a lot of research.... Can the Bodnar be fed
to the K3s directly bu jumper without attenuation? Just verifying.
Don't want to feed too high a signal and torch something. :)
73,
______________________
Clay Autery, KY5G
(318) 518-1389
On 06/05/18 07:38, Wes Stewart wrote:
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]