Posted by
charles-2 on
Aug 17, 2018; 5:17am
URL: http://elecraft.85.s1.nabble.com/KPA-1500-Efficiency-As-A-Function-of-Input-Power-tp7644435.html
Thanks for the replies.
Upon further testing, I have found that the efficiency of the KPA-1500
is varies greatly with driving power. The following table illustrates
the relationships between exciter power, voltage, current,
power-in(voltage x amps), power-out, efficiency, and dissipated power.
The following test was made with the KPA-1500 into a dummy load and
readings from the KPA-1500 utility software.
(Exciter)(Amps) (Voltage) (Power-In) (Power-Out) (Efficiency Pout/Pin)
(Dissipated Pwr)
10w 29a 52.7v 1528w 375W 375/1528 = 24.5%
1205w
15w 37a 52.7v 1950w 620w 620/1950 = 31.7%
1335w
20w 43a 52.6v 2262w 861w 861/2262 = 38.0%
1413w
25w 47a 52.6v 2472w 1060w 1060/2472 = 42.8%
1451w
30w 51a 52.6v 2682w 1227w 1227/2682 = 45.7%
1420w
35w 53a 52.5v 2782w 1380w 1380/2782 = 49.5%
1412w
40w 55a 52.5v 2887w 1497w 1497/2887 = 51.9%
1382w
45w 56a 52.5v 2940w 1600w 1600/2940 = 54.4%
1313w
50w 57a 52.5v 2992w 1703w 1703/2992 = 56.9%
1315w
53w 59a 52.5v 3097w 1825w 1825/3097 = 58.9%
1306w
The remarkable thing is that DISSIPATED POWER appears to be relatively
constant from 375w output through 1825w output. This implies the
KPA-1500 will need to dissipate nearly the same amount of heat at low
power output as at high power output, if I am interpreting the data
correctly. I would like to know from Elecraft if this is normal
behavior.
Charles K5UA
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]