Re: K3 TX Calib Dummy Load Recommendations

Posted by Drew AF2Z on Aug 26, 2018; 2:15pm
URL: http://elecraft.85.s1.nabble.com/K3-TX-Calib-Dummy-Load-Recommendations-tp7644681p7644699.html

I have a db Products 50 watt dummy load which was sold on ebay as
surplus cellular test equipment. That should mean it's good to a GHz I
guess. Even though it's only 50 watts I have used it briefly at 100.
There used to be lots of these on ebay but now all I see are 25 or 30
watt versions.

73,
Drew
AF2Z



On 08/25/18 19:09, Steve Lawrence via Elecraft wrote:

> What are recommended dummy loads to consider for use when running the K3 TX Calibration?
>
> Thanks - Steve WB6RSE
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]