K3EXREF issue? K3
Posted by
Gary Smith-2 on
Oct 21, 2018; 12:39am
URL: http://elecraft.85.s1.nabble.com/K3EXREF-issue-K3-tp7645822.html
I noticed CW stations were a bit off from
the P3 and thought I needed to
re-calibrate the P3 again. I did so and
still encountered issues. I have the
K3EXREF installed and it has been working
fine for some time now with the GPSDO 10
MHz source.
On a hunch I looked at the K3 REF CAL
results and the asterisk is not flashing.
I rebooted the GPSDO and the K3 but no
asterisk. I checked the cables and all are
intact. I pressed the #2 button for XREF
IN & no change, same if I tap it again for
XREFOUT.
It's either the GPSDO failed, the K3EXREF
board has failed or something else.
Any suggestions?
73,
Gary
KA1J
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]