Re: KPA-1500 issues
Posted by
Wes Stewart-2 on
Nov 28, 2018; 3:34am
URL: http://elecraft.85.s1.nabble.com/KPA-1500-issues-tp7646571p7646596.html
I fail to see what that will prove. The only length that will do anything
exciting is the 1/4 wavelength line and even that doesn't affect the SWR. The
other two will just repeat (less loss) on the input side, what terminates the
load side.
Wes N7WS
On 11/27/2018 3:51 PM, Michael Walker wrote:
> If you truly want to understand SWR, I recommend you pick a frequency and
> make up a 1/4, 1/2 and 1 wavelength sections of 50ohm coax.
>
> Then measure the SWR at those points into various different resistive
> loads, like 10, 25, 50, 75, 100, 150 and 200 ohms.
>
> I think you will find the results very interesting.
>
> Mike va3mw
>
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]