Login  Register

Re: k3 High Current Message on 10 meters

Posted by Bob McGraw - K4TAX on Dec 19, 2018; 3:06pm
URL: http://elecraft.85.s1.nabble.com/k3-High-Current-Message-on-10-meters-tp7347172p7647236.html

Check fans and cooling. Make sure airflow is not obstructed.

Bob, K4TAX


Sent from my iPhone

> On Dec 19, 2018, at 8:53 AM, Gadget Lust <[hidden email]> wrote:
>
> Hi Don:
>
> Actually, my issue is only on 10M.  It appears that as I transmit, current consumption increases, and I get occasional high current messages.  This is more apparent on long duty cycle modes like RTTY, and at higher power levels (80-100W).  If I watch, I can see current consumption start at 16 amps, and slowly rise to 25-27 amps.  
>
> I performed a TX gain Cal successfully, and that made it a bit more stable (only rising to 20 or 21 amps now), but it still concerns me.  A friend suggested this may be blown coils in the output bandpass filters.  I can wrap new coils if needed, but don’t want to do this if that’s not the problem.
>
> 73
> Harv
> K2PI
>
> Sent from Mail for Windows 10
>
> From: Don Wilhelm
> Sent: Wednesday, December 19, 2018 9:44 AM
> To: Bob Harvey - K2PI; [hidden email]
> Subject: Re: [Elecraft] k3 High Current Message on 10 meters
>
> Harv,
>
> I did not see the initial post (fault of Nabble vs. the real Elecraft
> reflector), but High Current messages can be caused by a low impedance
> at the antenna connection, or also a fault in the KPA3, like one output
> transistor that is no longer functioning properly.
> There are other causes, like incorrect bias to the PA transistors.
> Without more specific observations, it is difficult to give a specific
> answer.
>
> Have you tried a TX Gain Calibration on your K3/K3S?  If not, try it.
>
> 73,
> Don W3FPR
>
>> On 12/19/2018 9:30 AM, Bob Harvey - K2PI wrote:
>> John did you ever get an answer to this?  I have a similar situation.
>>
>> 73
>> Harv
>> K2PI
>>
>>
>>
>> --
>> Sent from: http://elecraft.365791.n2.nabble.com/
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:[hidden email]
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>> Message delivered to [hidden email]
>>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]