Re: How to Isolate 2nd Transceiver in two Radio Base Station (WU6R / Mark)

Posted by Elecraft mailing list on Jan 01, 2019; 3:25pm
URL: http://elecraft.85.s1.nabble.com/How-to-Isolate-2nd-Transceiver-in-two-Radio-Base-Station-WU6R-Mark-tp7647564p7647568.html

Dick,

Thanks.
Mark

On Jan 01, 2019, at 07:46 AM, Dick Dievendorff <[hidden email]> wrote:

I just googled “bandpass filter so2r” and found a number of useful discussions and product references on this topic.

73 de Dick, K6KR



On Jan 1, 2019, at 04:34, Mark Wheeler via Elecraft <[hidden email]> wrote:


I see lots shack photos with two transceiver setups, especially two Elecraft K3S radios; how do you isolate the 2nd transceiver or SDR receiver (SDR Play, for example) so that you do not damage one transceiver while transmitting with the other? I am assuming there is a way to use both radios at the same time.

Can I safely use an antenna switch to switch between multiple transceivers using one antenna, or will I risk damaging the non-transmitting radio on the other side of the antenna switch?

If there is a way to do this can anyone explain their setup?

Thanks.

Mark
WU6R
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]