Re: How to Isolate 2nd Transceiver in two Radio Base Station (WU6R / Mark)
Posted by
john@kk9a.com on
Jan 01, 2019; 5:27pm
URL: http://elecraft.85.s1.nabble.com/How-to-Isolate-2nd-Transceiver-in-two-Radio-Base-Station-WU6R-Mark-tp7647564p7647573.html
Two transceivers is a typical contesting setup. I do not believe that you
are contester so it would probably have little value to you. Typically a two
radio station on operator setup (SO2R) has one transceiver on one band and
the other on a different band with filters to protect the receivers. With
super human operating skills very high run rates are possible:
https://www.youtube.com/watch?v=bIW1Z1uFbRw&t=259s
John KK9A
Mark Wheeler mark3575 at icloud.com
I see lots shack photos with two transceiver setups, especially two Elecraft
K3S radios; how do you isolate the 2nd transceiver or SDR receiver (SDR
Play, for example) so that you do not damage one transceiver while
transmitting with the other? I am assuming there is a way to use both
radios at the same time.
Can I safely use an antenna switch to switch between multiple transceivers
using one antenna, or will I risk damaging the non-transmitting radio on the
other side of the antenna switch?
If there is a way to do this can anyone explain their setup?
Thanks.
Mark
WU6R
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]