Posted by
Bob McGraw - K4TAX on
Jan 06, 2019; 7:42pm
URL: http://elecraft.85.s1.nabble.com/KAT-500-and-open-wire-tp7647776p7647780.html
Yes I use a balanced feed line being the "window" type line. It feeds
a 250 ft wire in the center at 50 feet. I have about 75 ft of feed line
from the center of the antenna then, through the attic eve vent,
supported on some wooden hangers I made and attached to the roof
rafters. Then it drops through the ceiling to the balun which sits on
the shelf above the KPA500 and the KAT500. The balun is a Balun
Designs 1:1 ATU current balun rated at 5 kW being model 1171t. I use
a common mode choke, being model 8232 purchased from The Wireman. It
runs from the balun to one of the tuner 3 outputs. Works great from
160M through 10M.
Of note, I am on the 2nd floor of a wood frame house more in the
center. No windows or walls to the outside. I do not use any type of
"station ground" to the outside. I do have lightning protection devices
where the feed lines and rotor lines enter the house. As the antenna
and feed line is quite well balanced, there is no RF radiation in the
shack an thus no RF issues with computers, phones, TV's, surround sound
systems, and such. Each piece of station equipment is bonded to the
station power supply ground terminal using a dedicated ground jumper.
The 3rd pin AC ground is maintained and the amp runs from a dedicated
240 VAC circuit.
Works great!
73
Bob, K4TAX
On 1/6/2019 10:59 AM, Viggo Magnus Nilsen Nilsen wrote:
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]