Login  Register

Re: KAT 500 and open wire

Posted by K9MA on Jan 06, 2019; 11:21pm
URL: http://elecraft.85.s1.nabble.com/KAT-500-and-open-wire-tp7647776p7647793.html

Don,

I guess I should have pointed out that I was assuming one of those
wide-range, balanced tuners of days of yore.  I have one of those
plug-in coil tuners I built long ago, and it will match almost anything,
so feedline length is seldom an issue. Alas, the commercial tuners
available today have much smaller ranges, so one does have to ensure
that the impedance is in range, both of the tuner and the balun.

73,
Scott K9MA



On 1/6/2019 16:44, Don Wilhelm wrote:

> Scott,
>
> As I indicated, that is NOT true of just any length of window line.
> Some will work while others will not.
>
> With the G5RV, the only thing we know for sure is that on 20 meters,
> the impedance at the end of 34 feet of 300 ohm feedline is
> approximately 75 ohms.
> The impedance at that point will not be the same for other bands, and
> that is why a tuner is required.
>
> Once you get RF onto the radiator, it will be radiated.  One real
> question is just how much loss do you encounter in the feedline. The
> other real question is, how much trouble do you have matching the
> shack end impedance to the 50 ohm output requirement of the transceiver.
>
> In days of old when we used plug-in coils in the transmitter and tuned
> the output tank to resonance, we could tap off those PA tank coils to
> match most any impedance.  That capability moved into the antenna
> tuner with the advent of 50 ohm only transceivers - the first antenna
> tuners used balanced plug-in coils which could handle both balanced
> and unbalanced feedline, as well as low to high impedance depending on
> where you placed the tap(s) on the coil.
> The problem with those tuners is that they were not conducive to rapid
> band changes - you had to plug in coils for a different band.
>
> The Johnson Matchbox was a great asset to band changing and the proper
> taps on the coils, but its matching range was much more limited than
> those old-fashioned plug-in coils which provided a very wide range of
> matching impedance.
>
> 73,
> Don W3FPR
>
> On 1/6/2019 5:15 PM, K9MA wrote:
>> The really attractive thing about open line, and even window line, is
>> that its loss is so low you can use it at a very high SWR, and take
>> care of the matching at the station end. This is especially useful
>> for multi-band antennas. The famous G5RV, for example, will work just
>> exactly the same fed with window line and a tuner as it will with the
>> usual matching section.
>>

--
Scott  K9MA

[hidden email]

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]