Re: K3: Receiver recovery time
Posted by
Don Wilhelm on
Jan 13, 2019; 7:53pm
URL: http://elecraft.85.s1.nabble.com/K3-Receiver-recovery-time-tp7648024p7648043.html
Dave,
I am trying to think of how you might test it.
The best I can think of is to listen to both a noise source and an XG3
sending a CW string of dots. Increase the speed of the CW sent by the
XG3 until you can no longer hear the noise source between dits.
Then either calculate the off times for the dits or measure it on an
oscilloscope.
73,
Don W3FPR
On 1/13/2019 2:07 PM, Dave Cole (NK7Z) wrote:
> Hi again Scott,
>
> Thank you for your answer, but I am not being clear.
>
> Not during break in, just sitting there in receive... If the radio is
> hit with an S9+ signal, how long after the S9+ signal terminates before
> the K3 receiver recovers enough to show an weak signal on the IF... No
> T/R happening, just sitting there in receive.
>
> You are close to what I am looking for... I am investigating the
> possibility of using the K3 as the receiver portion in a homebrew
> bistatic radar setup running in the HF spectrum.
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]