Login  Register

Re: Silent power supply for a K3s

Posted by Elecraft mailing list on Jun 10, 2019; 5:50am
URL: http://elecraft.85.s1.nabble.com/Silent-power-supply-for-a-K3s-tp7652889p7652916.html

 Somewhere around 1980 I was talked into buying a power supply at a hamfest by my good friend who was a great technician.  He told me it was a terrific deal.  He was right.  I don't remember what I paid for it but I know it was lessthan $100.  It was a 56 amp rack mounted Llamda metered supply.  The model is an LM G12-M.  I believe it weighs about 75 pounds.  I used to have it in a relay rack at my old QTH shack.  In my present shack I have it sitting on a furnituredolly which makes it easy to roll around on the floor.  It sits under my desk.  It developed an audible arc when turned on so I leave it on 24 - 7.  I'm sure the new cost of it would be pretty high but I'm so glad I followed my friend's advice tobuy it.  No RFI and no fans.
BillK3WJV

    On Sunday, June 9, 2019, 4:30:07 PM EDT, Ken Winterling <[hidden email]> wrote:  
 
 I use an IOTA DLS-55 SMPS power supply (https://www.iotaengineering.com/
dls55.htm).  It provides 55 amps, doesn’t produce RFI, is audibly quiet,
and rugged.  Mine is mounted under the radio table and is on 24/7/365.. I
never hear it. Iota also makes them in other output currents and voltages.

Ken
WA2LBI


On Sun, Jun 9, 2019 at 3:27 PM Bob McGraw K4TAX <[hidden email]> wrote:

> I find Mark's point very important.  Obtain and use a supply which is
> more than adequate for the service or load.  Thus a 25 amp supply
> feeding a radio drawing 20+ amps will need lots of cooling.  This is
> not the way to do it.  Get a 50 amp supply for a radio drawing 20+ amps
> and the fan(s) will likely never come on.    Go the cheap way and get
> the cheap results.    Do it right and be happy.  Don't be a cheap ham
> and then complain about the product you purchased.
>
> There is more to choosing a power supply than volts and amps. How about
> duty cycle?  And CCS rated supplies vs. ICAS rated supplies.  Humm.......
>
> 73
>
> Bob, K4TAX
>
>
> On 6/9/2019 2:12 PM, Mark Murray via Elecraft wrote:
> > Peter,
> >
> > Check out the high amperage 13,8 volt power supplies offered by Samlex
> > America at the following link, and in particular their 100-amp -plus
> > (continuous) supplies where the fans do not activate for low draws.  You
> had
> > mentioned something about price not being so important.  These ain't
> cheap.
> > 73 de Mark .w2or.
> >
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:[hidden email]
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to [hidden email]
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]  
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]