Re: ALC implementation

Posted by Jim Brown-10 on Jul 13, 2019; 2:14am
URL: http://elecraft.85.s1.nabble.com/ALC-implementation-tp7653437p7653775.html

A common cause of incidental AM is ripple in the crystal filter(s) in
use. One reason I went to the 2.8 kHz filter was that it had less
ripple, and the difference was obvious on RTTY.

73, Jim K9YC

On 7/12/2019 3:45 PM, Conrad PA5Y wrote:
> It should be mentioned that FT8 and JT65 are constant envelope and therefore there should not be any AF envelope to follow. Actually when I recently measured the AF output from WSJT-X there was a tiny amount of AM, around 1.4% in fact which so small as to be of no consequence.


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:[hidden email]

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to [hidden email]