Posted by Nr4c on Jul 14, 2019; 11:20am URL: http://elecraft.85.s1.nabble.com/No-output-on-CW-with-K3-tp5803041p7653790.html
Make sure BOX is ON on all bands.
Make sure not in TEST mode on bands with no CW out.
Sent from my iPhone
...nr4c. bill
> On Jul 14, 2019, at 4:09 AM, VY1JA <[hidden email]> wrote:
>
> The YCCCN Remote OPs group (VY1AAA) uses the K3S at this site (VY1JA) and
> reported the same problem but only on Six meters. The K3s is working
> perfectly on all other bands.
> It has been confirmed that the CONFIG does not redirect TX output and tests
> on TUNE show good output on 6 and low antenna SWR there. As soon as this
> unit is switched to CW on 6 and keyed, there is no output.
>
> Next troubleshooting steps for getting this GG for the RemoteOps?
> TNX,
> J., VY1JA
>
>
>
> --
> Sent from: http://elecraft.365791.n2.nabble.com/ > ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] >
> This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email]