Posted by KENT TRIMBLE on Jul 14, 2019; 11:56am URL: http://elecraft.85.s1.nabble.com/No-output-on-CW-with-K3-tp5803041p7653791.html
He means VOX.
K9ZTV
> On Jul 14, 2019, at 6:20 AM, Nr4c <[hidden email]> wrote:
>
> Make sure BOX is ON on all bands.
>
> Make sure not in TEST mode on bands with no CW out.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
>> On Jul 14, 2019, at 4:09 AM, VY1JA <[hidden email]> wrote:
>>
>> The YCCCN Remote OPs group (VY1AAA) uses the K3S at this site (VY1JA) and
>> reported the same problem but only on Six meters. The K3s is working
>> perfectly on all other bands.
>> It has been confirmed that the CONFIG does not redirect TX output and tests
>> on TUNE show good output on 6 and low antenna SWR there. As soon as this
>> unit is switched to CW on 6 and keyed, there is no output.
>>
>> Next troubleshooting steps for getting this GG for the RemoteOps?
>> TNX,
>> J., VY1JA
>>
>>
>>
>> --
>> Sent from: http://elecraft.365791.n2.nabble.com/ >> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:[hidden email] >>
>> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html >> Message delivered to [hidden email] >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:[hidden email] >
> This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > Message delivered to [hidden email] >