Reflected power
Posted by
Stephen Rabinowitz on
Sep 15, 2019; 11:57pm
URL: http://elecraft.85.s1.nabble.com/Reflected-power-tp7655160.html
My KPA-1500 switches from operate to standby due to reflected power more
than 200w whenever drive power exceeds about 8 watts on 7 MHz. The forward
power at that point is about 400w. The antenna is a double bazooka that
shows an SWR of about 1.2 on a RigExpert AA-230Pro antenna analyzer. A
Telepost LP-100A digital wattmeter shows SWR 1.3 with Z=52, R=49, Ph=17, and
X=15. The KP1500 tunes to an SWR of what it labels 1.1 on that frequency.
The latest firmware, version 2.27 is installed. This problem does not occur
with double bazooka antennas on 80m or 30m, or with Yagis from 20m to 6m. It
seems to me that there is a brief surge in reflected power at the very onset
of the transmission that triggers the response, but that the reflected power
quickly decreases to normal levels of just a few watts. Any ideas for
dealing with this problem would be much appreciated.
73, Steve K2SN
______________________________________________________________
Elecraft mailing list
Home:
http://mailman.qth.net/mailman/listinfo/elecraftHelp:
http://mailman.qth.net/mmfaq.htmPost: mailto:
[hidden email]
This list hosted by:
http://www.qsl.netPlease help support this email list:
http://www.qsl.net/donate.htmlMessage delivered to
[hidden email]